• High Peak Steels Ltd, Brookfield Ind Est, Peakdale Road, Glossop, Derbyshire, SK13 6LQ

hdr-black1

EN1APB (230M07PB) Engineering steel

EN1APB (230M07PB) is a non alloyed free cutting steel with added PB (Lead) which is suitable for applications where good machinability is the prime consideration. Typically used for the rapid production of parts which shall not be subject to high stresses in service.

Case hardening can be carried out but EN1APB (230M07PB) steel is not recommended for general case hardening work and it is not intended for the use where the hardened case is subject to severe impact in service.

EN1APB (230M07PB) should not be used for hollow parts which may be subject to internal pressure as the material does not possess good transverse properties.

Steel stock range

High Peak Steels stock EN1APB (230M07PB) in round bar and hexagon.

Associated standards

UK Standard EN1A LEADED | European Grades 11SMn30PB | Werkstoff 1.0718 | SAE/AISI 12L14

Or call 01457 866911 for more details

EN1APB (230M07PB) Bright

ProductMetric sizes
Min
MaxImperial sizes
Min
Max
codes-round28mm dia80mm dia3/8" dia3" dia
codes-flat2
codes-square2
codes-hex213mm | 1/2"70mm | 2 3/4".500 A/F2.760 A/F

EN1APB (230M07PB) Chemical Composition

 CSiMnSPCrNiMoPb
Min0.070.150.90.25
Max0.150.41.30.350.070.30.40.150.25

EN1APB (230M07PB) Mechanicals

ProductMetric sizes
Min
MaxImperial sizes
Min
Max
codes-round28mm dia80mm dia3/8" dia3" dia
codes-flat2
codes-square2
codes-hex213mm | 1/2"70mm | 2 3/4".500 A/F2.760 A/F

EN1APB (230M07PB) Typical applications

  • LIGHT DUTY STUDS
  • CYCLE COMPONENTS
  • INTRICATE NON-CRITICAL COMPONENTS