EN32 (080A15) Engineering steel
EN32 (080A15) is a general engineering steel, suitable in applications where heavy stresses and heat treatment are not involved. High Peak Steels stock this in a range of sizes and shapes.
It is a bright drawn, or turned, mild steel with good machinability. Ideal for use in a variety of general engineering applications. EN32 (080A15) can be case hardened and is normally supplied in the as drawn condition. This material has good weldability characteristics, however it has poor hardenability.
Steel stock range
High Peak Steels stock EN32 (080A15) in round bar, flat bar, square bar and hexagon.
Associated standards
UK Standard EN3B & EN32 | European Grades C15, C20, ST52-3, S235 | Werkstoff 1.0402, 1.0401, 1.1151 | SAE/AISI 1018
EN32 (080A15) Bright
| Product | Metric sizes Min | Max | Imperial sizes Min | Max |
|---|---|---|---|---|
 | 6mm dia | 200mm dia | 3/16" dia | 8" dia |
 | 13mm x 3mm | 300mm x 25mm | 1/4" x 1/8" | 12" x 2" |
 | 20mm | 100mm | 3/16" | 6" |
 | 7mm A/F | 65mm A/F | .312" A/F | 2.760 A/F |
EN32 (080A15) Chemical Composition
| C | Si | Mn | S | P | Cr | Ni | Mo | |
|---|---|---|---|---|---|---|---|---|
| Min | 0.13 | 0.1 | 0.7 | |||||
| Max | 0.18 | 0.4 | 0.9 | 0.05 | 0.05 | 0.3 | 0.4 | 0.15 |
EN32 (080A15) Typical applications
- Shafts & rollers
- Machinery parts
- Threaded bars
- Spindles & axles
- Low stress engineering applications